5 DIY Techniques to Remove Dents Without Damaging Your Vehicle

If there’s one thing that we can agree on as human beings, it’s that dents suck a hundred and ten percent. And it’s not that they’re solely part of the problem, although they are a major one. No, the most frustrating aspect of dents is the repairs. And with the new God of War out, you don’t want to waste the weekend haggling prices at the repair shop. No, you want to kill beasts, listen to Mimir’s tales, and enjoy quality time with your son.

So, here are some simple and safe DIY techniques that’ll help repair those dents at home. And don’t worry; I use the same techniques at my car dent repair in Riverside.

Types of Dents

Essentially, there are two ways to remove dents: the traditional expensive one and the inexpensive paintless one. The techniques that you’ll learn here are of the paintless variety, and for them, it’s crucial to have a basic understanding of the 4 basic types of dents:

Round Dents

• Circular in appearance but can also be a bit distorted.
• Typically caused by a blunt impact.
• Have a smooth continuous gradient.

Sharp Dents

• Small in size but has no specific appearance.
• Caused by sharp blows or objects.
• Have sharp gradients.

Creased Dents

• Have elongated appearances.
• Caused by large objects or multiple hits.
• Smooth continuous gradient.

Extreme Dents

• Varied appearance.
• Caused by huge or continuous impacts like those of an accident.
• No consistent gradient.

Tools You’ll Need

• Hot air gun with variable nozzle shapes and sizes.
• Strongly adhesive but easily washable glue.
• Wooden or metallic beams of varying sizes.
• Plunger and vacuum-powered suction cups.
• A rubber mallet with both a blunt and sharp edge.
• A bucket and a source of hot water.

The 5 Magical Techniques

The Heat It till You Bend It Method

• Only applicable for round and creased dents.
• Start by gradually warming the dented area using a bucket of hot water.
• Usually, by this point, dents with small curves will pop out on their own.
• If the dents don’t pop out, use a heat gun to directly heat the affected area using circular motions.
• Take care to use a temperature that’s safe for the paint.

The Suction Cup Technique.

• This method can effectively remove round, creased, and low-curved sharp dents.
• Directly place a plunger on the dented region and make sure that the seal is perfect.
• Using the plunger try to suck out as much and as many of the dents as possible.
• If the dent remains or it’s a sharp dent, use vacuum-powered suction cups.

The Sticky but Not Icky Method

• Except for the extreme variety, this method is good for all kinds of low curved dents.
• Use the glue to stick a non-metallic beam or any grabbable object onto the dent.
• Now, just pull on it.

If All Else Fails to Use the Hammer Technique

While great, it’s not uncommon for the above methods to require additional and more impactful assistance. At car dent repairs in Riverside, we use a rubber mallet to provide that tiny bit of extra force – as it’s a lot more forgiving than the alternatives. However, be sure not to hit the mallet onto the dented area; just gently tap it.

Know Your Limits

Although quite effective, keep in mind that these techniques are DIYs and will only take you so far. Furthermore, none of these methods will work for extreme dents. In conclusion, if you encounter a particularly pesky dent that won’t go away, don’t try to force it and take your ride to a repair shop.

PAINTLESS DENT REPAIR – SOME IMPORTANT POINTS TO KEEP IN MIND

 

Dents and dings are the most common problem faced by car owners when they take their vehicles out. Unfortunately, most of us have to deal with these irritating and stressing dents after every few weeks due to debris or hail storms or trolleys at the supermarket. While in the past getting a dent out was a big hassle as it meant stripping down the paint, applying body fillers and then painting the entire area which was an expensive as well as time consuming job, PDR has made life easy for many.

Paintless dent repair has brought some relief from this long drawn and costly process and now it is just a matter of few hours that you can have your vehicle back, free of all dents. Paintless dent removal is a cheap and shorter alternative to the traditional dent repair process as it makes use of some specialized tools and equipment to take out dents most efficiently.  However, it is also important to note that not every type of dent can be removed with this problem. Bigger or hard to reach dents or dents that damage the body paint are difficult to remove with this technology as they need extensive repair.

If you are considering paintless dent repair for your car dents, here are some important points to remember before you head out to the service station. 

Paintless dent repair process is relatively faster and more effective as it does not strip down the paint which means less time and effort. You can visit your local workshop and have the dents fixed in a few hours. This is a lot more convenient for car owners who need their vehicles on daily basis and cannot afford to wait longer or leave their vehicle overnight.

Paintless dent repair can fix almost all types of dent issues except deep or severe dents that are in places where the specialized tool cannot reach. This process can repair line damage, minor dings, and minimal creases that are light to handle and offer some space for the tool to reach from the inside and push the dent out. You must keep this in mind when taking your car for repair and consult a trained technician for best guidance.  

Paintless dent repair helps to maintain your vehicle’s original paintwork which also benefits its resale value in future. Potential buyers look very carefully and search for any new paint sprayed on the car panels. This is the reason you should be careful when going for repainting as color matching is necessary. It is here that paintless dent repair works as it can correct the dents without interfering with the original paint job. A professional auto body workshop can help your vehicle look free of all dents, just like new by using this innovative technology.

The best thing about paintless dent repair is that it is an environmentally friendly method for removing dents. It does not require sanding, use of chemicals and does not produce any waste as it relies on the technician’s skills to bring the car back to its original shape, making it good for the car owners and the planet.

All you need to do to avail the benefits of paintless dent repair is seeking a reputable auto body paint shop. It is essential to choose the right service provider who can deal with the dent problems as it is a skilled process that needs the best technicians. Paintless dent repair Ontario CA offers results at the most affordable packages. You can look forward to restoring your vehicle’s original paintwork in a short time and at a cost that is nothing as compared to what you have been paying in the past. 

Get the best dent-fixing service for your car in Corona

A spotless and dentless car is desirable for car owners. But cars are prone to dents and damage as they are used by their owners daily. Sometimes, it becomes even more difficult to know the exact reason for a dent in the car. Car dents can occur for a variety of reasons like careless driving, vandalism, and many more. But all types of dents do not require the same fixing; some can be concealed with a little touch-up while others may need professional expertise. Fix dent in car Corona to give your vehicle a new look.

Various Dent Fixing Techniques

There are multiple unconventional ways of fixing dents. But in practice two main techniques are briefly discussed below:

Traditional Dent Repair:

If the dent is severe that affects the paint of the car along with the metal body then the conventional dent repair method is considered. This method includes various steps that require expertise and time.

o    Assessment of damage caused to the car

o    Pulling out of the dent

o    Application of body filler

o    Sanding and glazing

o    Putting primer and repainting

The first step involves damage assessment to ensure which part of the car needs to be fixed or replaced. Pulling out of major dents cause damage to the paint and panels, for which body filler needs to be applied with sanding and glazing to smoothen out the surface. After the surface is ready, primer is sprayed to prevent rusting and finally, car paint is applied for making the car more attractive.

However, these conventional methods have been replaced by more advanced and innovative paintless dent repair techniques.

PDR (Paintless Dent Repair):

It is one of the most popular dent fixing techniques. If the cars have minor dents and the paint is not damaged, then the paintless dent repair technique can be used for fixing the dent. There are several tools for applying the techniques of PDR. For example, a popular technique involves using a dent puller with suction tabs and a glue gun for removing the dents from the car’s body. Another popular method is to use metal T bars for massaging the dent out without scratching the paint. It is considered not only a cost-effective method but also saves time.

Why do car dents need to be fixed immediately?

It is important to fix a car dent but the most essential thing is to fix it as soon as possible. If car dents are not fixed immediately, then the following issues can arise:

Rust:

The dents look ugly on the car but they can also damage the paint of the car. Even if the dents cause minor cracks on the panel, it allows the water to reach that part and seep under the clear coat and paint. If the dent is not fixed immediately, then water reacts with metal and oxidizes which leads to rust spots.

Long-term damage to the paint:

While fixing the dent on a car, you need to consider other things as well rather than an only dent. In case the dent has created scratches, it needs paint repair. In most cases, people reluctantly postpone an urgent repair that leads to further and bigger damage.

The resale value of the car gets reduced:

While selling a car, potential buyers check whether the car runs well but that does not mean they will ignore the appearance of the car. Even if it has smaller dents, the car will fetch a lower value and if there are rust spots or pain damage then the resale value will go down further.

Conclusion

You must be careful while fixing the dent of the car. If you are looking to fix dent in car Corona you paintless dent repair is the best option for your vehicle.

The Mechanics Guide to Auto Body Care and Repair

 

Are you a car enthusiast? Are you constantly looking to learn more about vehicles and what makes them tick? Then rejoice, for this is not a generic article that talks about only vehicular mechanics. Everyone knows how a car works, but only a few know about its body.

Prepared under the supervision of the top auto body repair in Riverside, you’ll find this guide about vehicular bodies to be the best way to satisfy your curiosity.

Structure

Let’s start with learning a little about the vehicular structure, its components, and its function.

Skeleton

Like most structures, your vehicle is built around a foundation that serves to anchor everything in its place. For a car, it’s its skeleton or better known as the frame, which is just a giant piece of welded metal shaped.

Windows and Doors

Dynamic components like doors and windows are attached separately. Doors are attached using a hinge while the windows go on the sliders. Rather than having their session, some minor components like side mirrors, spoilers, and skirts – are also fitted along with doors and windows.

Skin

The last component of your car’s structure is its skin, or rather the paint. Asides from being visual please and giving your vehicle a more personal look, auto body repairs in Riverside claim that it also protects the frame from rust.

Maintenance

Although sturdy and resilient, your car is not invincible; this means that if you’re not careful, you’re going to have to make a lot of visits to your auto body repair in Riverside. Don’t worry external maintenance is a lot simpler and easier than internal maintenance.

·         Paint becomes dull the longer it’s exposed to dirt, so make sure that you regularly wash your vehicle to prevent dust from settling in.

·         Besides washing, get your vehicle detailed at least once every two months. Many people confuse detailing with washing but detailing is much more thorough and much more apparent.

·         Regularly check your vehicle for signs of rust because once it takes hold, rust spreads faster than gossip about the Kardashians.

Repair

The first rule about auto body repair is that you don’t do it yourself. It might seem simple and easy, but auto body repair in Riverside is anything but that. Technicians train for years to learn complicated techniques like paintless dent removal and hail damage repair.

Dent removals

If you have a car, sooner or later, you’re going to have dents as well. Now technicians like to categorize dents into four types: round, sharp, long, and extreme, but I prefer my convention where a dent in either paintless repairable or isn’t.

Quick and inexpensive, paintless dent repairs are the go-to choice for almost all car owners. On the other hand, traditional dent repairs are expensive and require a lot of time but are sometimes necessary when paintless repairs aren’t possible.

Paint Protection

Lastly, let’s talk about paint protection. As soon as a vehicle gets on the floor, a clock starts to tick for when it’ll get its first scratch, and once that happens, all of the other scratches will come falling like dominos. Now, you can’t get paint work every time your car gets scratched, but with auto coating, you can protect it from getting scratched in the first place. So make sure to get your vehicle coated as soon as possible.

How Paintless Dent Repair Can Help You Save Your Car and Your Wallet

 

Do you want to talk about how the dent repairmen are scamming you with their sky-high rates, and how to choose one that’s reliable. Yeah, me neither.

I’m not here to talk your ear off by slandering the auto body repairs of Riverside Chino Hill, I’m here to give you the skills that’ll help you remove dents by yourself, without bleeding cash.

Identification

Before attempting to remove any dent, you need to identify its type and whether or not it’s on a metallic surface. Because different kinds of dents require different removal methods, and improper applications can make matters worse by causing paint damage or a deeper dent.

Removing Dents from Metallic Surfaces

1.    Plunger Method

Plungers are about the safest way to remove dents at home, at least according to all the auto body repairs in Riverside Chino Hill. And all you need is a cup plunger and nothing else.

Method

·         Place the plunger perpendicular to the dent.

·         Gently push the plunger in till.

·         Pull-on the plunger while keeping it perpendicular to the dent.

Effectiveness

·         Highly effective for removing medium-sized dents.

·         Can also remove creased dents through multiple applications.

·         Virtually zero risk of paint damage.

2.    The Cold Method

Method

Take a piece of dry ice and just gently rub it on the dented area. You might need to do it for more than ten minutes.

Effectiveness

·         Highly effective for removing small round dents and shallow sharp dents.

·         Doesn’t work on larger dents

·         Zero risk of paint damage.

3.    The Hot n Cold Method

The top choice of the best auto body repairs in Riverside Chino Hill, the hot n cold method combines previous techniques to boost their success rate.

Method

·         Heat the dented area using the highest settings of the heating element

·         Wet the plunger cup using cold water.

·         Place the plunger perpendicularly to the dent and push it in.

·         While holding the plunger in place, pour cold water on the dent.

·         Pull-on the plunger after the dent cools down.

Effectiveness

·         The most effective method to remove dents at home

·         Works for all dent types.

·         There is a slight risk of paint damage.

Removing Dents from Non-metallic Surfaces

Nowadays most car bumpers are made up of plastic, which requires different techniques to remove. Regardless of the dent type, it’s recommended that you remove the bumper before attempting to remove the dent. The best way to remove small dents is to heat it up and then use compressed air or dry ice to cool it down, while a mallet works well for large to medium-sized dents.

Conclusion

The only reason dent removals cost so much is because the repairmen are the only ones who know how to do them. But that’s no longer the case. Thanks to our little tips here, now you are in on the secret, too. Do remember, though, always be gentle and never use too much force. Gentle always does it. If things get a bit out of hand, you can always go to professional repair experts and call it a day.